6-Pack One Inch Ferro Rod Fire Starter with 2 Holes | Small Ferrocerium Flint for DIY Paracord Bracelets | Survival & Emergency Fire Starting Tool for Camping, Hiking, Outdoor Gear

  • Six two-hole toggles: Bare ferrocerium rods for DIY cord projects, bracelets, keychains and compact kits.
  • 5/16 × 1 inch size: Each toggle measures approximately 7.9 mm in diameter and 25.4 mm long.
  • Plan your cord setup: Two holes let you thread in your own cord. Check the fit and leave the rod accessible for use.
  • Components only: No striker, cord, finished bracelet or keychain is included.
  • Practice with the short rod: Expose a small striking area beneath the protective coating, hold securely and direct sparks into dry, finely prepared tinder.

SKU: 825-6 Category:

(4 customer reviews)

$15.99

Out of stock

See the compact toggle format

Watch FERROFIRE’s 5/16 × 1 inch toggle demonstration, also available in the Video tab.

This listing contains six bare toggles. The video illustrates use and carry ideas, not package quantity or included accessories. Cord, striker and other equipment shown are not included. Keep cord and fingers clear of sparks and the scraping edge.

6 toggles

Make several cord projects or equip small kits.

5/16 × 1 inch

Approximately 7.9 mm diameter × 25.4 mm length.

2 holes each

Thread your own cord through the toggle.

Build a fire-making component into your carry

The FERROFIRE Toggle 6-Pack contains six short ferrocerium rods for DIY paracord bracelets, keychains and other cord projects. Each toggle has two holes, giving you a way to thread it into a custom setup rather than carry a separate loose rod.

At 1 inch long, this is a compact project component with a short striking surface. Plan your cord arrangement so you can expose and hold the rod for use, and practice with the finished setup before relying on it outdoors.

Package contents: Six bare two-hole ferrocerium toggles. A striker, cord and finished bracelet or keychain are not included.

At a glance

  • Quantity: 6 toggles
  • Material: Ferrocerium
  • Diameter: 5/16 inch (approximately 7.9 mm)
  • Length: 1 inch (25.4 mm)
  • Cord holes: Two per toggle
  • Striker: Not included

Practice with the compact format

Five clear steps, plus a separate striker guide, each with its own photo. These shared technique photos show a different FERROFIRE setup. The striker, cord and assembled fire starter shown are not included in this pack of bare rods.

Set the toggle up where you can grip it securely and keep your fingers clear of the striker. Keep loose cord away from the striking area. If your finished project prevents a secure grip, remove the toggle before using it.

Step 1

Prepare your tinder

Gather dry, finely prepared tinder and kindling. Place the tinder on a suitable fire-safe surface.

Step 2

Expose the ferrocerium

Scrape a small area of the black protective coating away to reveal the silver ferrocerium underneath.

Step 3

Position the striker

Hold the short toggle securely and place a suitable striker against the exposed surface, close to the tinder. Keep your fingers and any cord clear of the scraping edge and striking path.

Step 4

Brace your hand

Keep the striker hand steady and check your grip on the short toggle. If a bracelet, keychain or other cord project prevents a secure grip, remove the toggle before using it.

Step 5

Pull the rod back

When your grip allows, pull the toggle toward you against the steady striker to direct sparks into the tinder. Stop and reposition if the toggle slips; do not continue with an insecure grip.

Striker guide

Choose a scraping edge

Use a suitable ferro-rod striker. On the SA02 shown here, use a straight scraping edge for the rod; the serrated end helps prepare wood shavings.

Practice safely. Tinder preparation and technique matter. Sparks alone do not guarantee ignition, especially with damp tinder. Use only where fires are permitted, keep clear of other flammable items and fully extinguish your fire before leaving.

Before you choose

Is this a finished paracord bracelet?

No. You receive six bare toggles. Supply your own cord and other project components.

Will every cord fit the two holes?

Check your cord against the holes before assembly. The hole diameter is not specified here, so confirm the fit before planning your cord gauge or weave.

Can I strike it while it is attached to a bracelet?

Only use a setup that lets you expose the rod, grip it securely and keep the striker clear of your fingers and cord. Remove the toggle if your finished project gets in the way.

Does the pack include a striker?

No. Use a suitable ferro-rod striker, sold separately. The toggle produces sparks; you still need prepared tinder and kindling.

Weight 50 g
Dimensions 90 × 80 × 5 mm
Delivery Country

US, CA, DE

4 reviews for 6-Pack One Inch Ferro Rod Fire Starter with 2 Holes | Small Ferrocerium Flint for DIY Paracord Bracelets | Survival & Emergency Fire Starting Tool for Camping, Hiking, Outdoor Gear

5.0
Based on 4 reviews
5
100
100%
4
0%
3
0%
2
0%
1
0%
  1. Travis –

    I put these little guys on every shoe, the right shoe. Always have shoes. I will never rub two sticks together for a fire. These also make great stocking stuffers for all my non-prepper buddies, because they don’t want to rub to stick together either.

  2. matthew –

    A good backup for firestarting

  3. Diane –

    Looks good, works great. Really good component for survival gear.

  4. Noah –

    Exactly as described for a good price.

Add a review

Q & A

Ask a question
6-Pack One Inch Ferro Rod Fire Starter with 2 Holes | Small Ferrocerium Flint for DIY Paracord Bracelets | Survival & Emergency Fire Starting Tool for Camping, Hiking, Outdoor Gear 6-Pack One Inch Ferro Rod Fire Starter with 2 Holes | Small Ferrocerium Flint for DIY Paracord Bracelets | Survival & Emergency Fire Starting Tool for Camping, Hiking, Outdoor Gear
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
There are no questions yet

Join Waitlist

We will inform you when the product arrives in stock.
Please leave your valid email address below.