5 drilled rods
Add your own cord or handle to suit each kit.
3/8 × 4 inches
Approximately 9.5 mm diameter × 101.6 mm length.
15,000 strikes
Per rod. Actual wear varies with technique and pressure.
Start with a rod. Build your setup.
The FERROFIRE Classic Drilled 5-Pack gives you five bare ferrocerium rods for camping kits, bushcraft practice and custom fire starters. Each rod has a drilled lanyard hole so you can add a suitable cord or connect the rod to your preferred carry setup.
The 4-inch length provides room to grip and strike, while the 3/8-inch diameter offers a practical everyday size. Keep spare rods with your outdoor gear or build several kits for different uses.
Package contents: Five drilled ferrocerium rods. A striker, handle, knife and lanyard are not included. Accessories in the photos are shown for demonstration.
Plan your Classic fire starter
What does the lanyard hole do?
It gives you an attachment point for a suitable cord. Choose a cord that fits the hole and secure it for your intended use. Cord is not included.
Is this a complete fire-starting kit?
No. This pack contains five bare rods. Add a suitable striker and any handle or storage accessories separately.
Do you also offer rods without holes?
Yes. For projects that call for an undrilled blank, see the Classic 5-Pack without lanyard holes.
How should I care for the rods?
Leave the protective coating on unused areas. After use, wipe each rod dry before storage. The 15,000-strike rating is per rod; wear depends on your striker, pressure and technique.
See a ferro rod in action
Watch a shared FERROFIRE rod-and-striker demonstration.
The model, rod size and accessories shown may differ. This product is a bare-rod pack; the striker and other accessories shown are not included.
A closer look at the striking technique
Prepare suitable dry tinder and practice controlled strokes before relying on a ferro rod outdoors.
Shared FERROFIRE demonstration, not a presentation of this pack’s contents. The rod and accessories shown may differ. Use only where fires are permitted and fully extinguish any fire before leaving.
Prepare, strike and practice
Five clear steps, plus a separate striker guide, each with its own photo. These shared technique photos show a different FERROFIRE setup. The striker, cord and assembled fire starter shown are not included in this pack of bare rods.
Step 1
Prepare your tinder
Gather dry, finely prepared tinder and kindling. Place the tinder on a suitable fire-safe surface.
Step 2
Expose the ferrocerium
Scrape a small area of the black protective coating away to reveal the silver ferrocerium underneath.
Step 3
Position the striker
Place the scraping edge against the exposed rod, close to your prepared tinder. Keep fingers and any cord clear of the striking path.
Step 4
Brace your hand
Hold the striker securely and keep that hand steady near the tinder. Check your grip before making a stroke.
Step 5
Pull the rod back
Draw the rod toward you against the steady striker to direct sparks into the tinder. Adjust the angle and pressure with practice.
Striker guide
Choose a scraping edge
Use a suitable ferro-rod striker. On the SA02 shown here, use a straight scraping edge for the rod; the serrated end helps prepare wood shavings.
Practice safely. Tinder preparation and technique matter. Sparks alone do not guarantee ignition, especially with damp tinder. Use only where fires are permitted, keep clear of other flammable items and fully extinguish your fire before leaving.
BUILT TO WORK. SPECS TO KNOW.
The Classic drilled 5-pack, at a glance.
| Model | 095D · Classic drilled |
|---|---|
| SKU | FCR-095.1016D-5F |
| Quantity | 5 rods |
| Rod diameter | 3/8 in / approximately 9.5 mm |
| Rod length | 4 in / 101.6 mm |
| Rod material | Ferrocerium |
| Lanyard hole | 1 drilled hole per rod |
| Rated strikes | 15,000 per rod |
| Package contents | Five bare drilled ferrocerium rods |
| Not included | Striker, handle, knife and lanyard |
Rod measurements are diameter and length. Metric dimensions are converted from the listed inch size. The strike rating is per rod, not a guarantee of successful fires; actual wear varies with striker choice, pressure and technique.
FIND YOUR FERRO ROD
Start with diameter and length, then check the drilled-hole option for your DIY setup or cord attachment.
↔ Swipe or scroll sideways to compare.
| Feature | 040Mini |
095DClassic drilled Current model |
1016DHeavy-Duty drilled |
1270DHeavy-Duty Plus drilled |
143DSuper-Duty drilled |
|---|---|---|---|---|---|
| Diameter | 5/32 in ≈ 4.0 mm |
3/8 in ≈ 9.5 mm |
1/2 in 12.7 mm |
1/2 in 12.7 mm |
9/16 in ≈ 14.3 mm |
| Length | 3 in / 76.2 mm | 4 in / 101.6 mm | 4 in / 101.6 mm | 5 in / 127 mm | 4 in / 101.6 mm |
| Lanyard hole | — | 1 drilled hole per rod | 1 drilled hole per rod | 1 drilled hole per rod | 1 drilled hole per rod |
| Rods per pack | 20 rods | 5 rods | 2 rods | 2 rods | — |
| Rated strikes per rod | 800 | 15,000 | 18,000 | 18,000 | 20,000 |
Dimensions are nominal. Strike ratings do not guarantee ignition. — = not yet verified. Children using Mini rods need close adult supervision.














040
095D
1016D
1270D
143D
JDR –
Any outdoor trip, expedition, or day out should not be undertaken without a fire tool. These ferro rods are excellent with good heavy sparks every single time I strike them. They have a convenient hole for a lanyard, and should be a permanent part of the outdoors kit. These are a bit heavier than many others which means they will last.
Allen –
These are a really great value. Throws great sparks.
Karlee –
Had a minor issue with shipping. I contacted the supplier and they responded immediately to resolve the issue. Excellent customer service and communication. Very good product. I would not hesitate to purchase from them again.
Robert –
Ver handy to add to bushcraft knife sheath
Paul –
Ferrofire rods work really well. I bought one 6 months ago and it works so well that I bought this 5 pack to give one to each of my boys and to put one in my emergency bag and one in my hunting pack. Throws a good spark and highly recommend this product.