2 strikers
Set up two fire-starting kits or keep a spare scraper.
Four edges
Use a sharp striking edge against your ferrocerium rod.
85 × 17 mm
Approximately 3.35 × 0.67 inches for each carbon steel striker.
A separate tool for striking and scraping
The FERROFIRE SA02 is a carbon steel striker for use with a ferrocerium rod. Four striking edges provide contact surfaces for scraping sparks from the rod, while the serrated end can help prepare fine shavings from suitable tinder materials.
The 85 mm body gives you room to hold the scraper while keeping your fingers clear of the working edge. Practice your grip and striking angle with the gloves you plan to use outdoors.
Package contents: Two SA02 strikers. No ferro rod is included.
At a glance
- Model: SA02
- Quantity: 2 strikers
- Material: Carbon steel
- Color: Metal silver
- Dimensions: 85 × 17 mm (approximately 3.35 × 0.67 inches)
- Working features: Four striking edges and a serrated end
- Ferro rod: Not included
Prepare, strike and practice
Use these five steps to practice with your SA02 and a suitable ferrocerium rod. The photos show a demonstration setup: this pack contains two SA02 strikers only. The rod, cord and assembled fire starter shown are not included.
Step 1
Prepare your tinder
Gather dry, finely prepared tinder and kindling. Place the tinder on a suitable fire-safe surface.
Step 2
Expose the ferrocerium
If your rod has a protective coating, scrape a small area away to reveal the ferrocerium underneath.
Step 3
Position the striker
Place a straight scraping edge of the SA02 against the exposed rod, close to the tinder. Start at roughly a 45-degree angle and adjust as needed. Keep fingers and any cord clear of the striking path.
Step 4
Brace your hand
Hold the striker securely and keep that hand steady near the tinder. Check your grip before making a stroke.
Step 5
Pull the rod back
Draw the rod toward you against the steady striker to direct sparks into the tinder. Adjust the angle and pressure with practice.
Striker guide
Choose a scraping edge
On the SA02, use a straight scraping edge against the ferro rod. The serrated end helps prepare fine wood shavings. Keep fingers clear of both working areas.
Practice safely. Tinder preparation and technique matter. Sparks alone do not guarantee ignition, especially with damp tinder. Use only where fires are permitted, keep clear of fuel and other unintended flammable material, and fully extinguish your fire before leaving.
Wipe the carbon steel striker dry after use and store it so the working edges do not damage other gear.
Serrated end
Use the teeth for controlled scraping of suitable tinder material. Keep your fingers clear and avoid using the scraper as a pry bar.
Four striking edges
Try a different edge or adjust the contact angle if you are removing too little material from the ferro rod. Technique and tinder preparation both matter.
SA02 questions
Is this a complete fire-starting kit?
No. The pack contains two strikers only. Add a ferrocerium rod and suitable tinder separately.
Does the striker itself make a flame?
No. Its edge scrapes material from a ferrocerium rod to produce sparks. You then use those sparks to ignite prepared tinder.
Can I use the serrated end to prepare tinder?
It can be used for scraping fine shavings from suitable tinder material. It does not replace every cutting or wood-processing tool.
How should I care for the carbon steel?
Remove debris and dry the striker after use. Check the working edges before the next outing and store it so they do not damage other gear.











Laura –
What an awesome fat wood scrapper and it is one of the best ferro rod sparking tools i have ever used well worth the money i bought another set. They are that good try them once and i am sure you’ll use them exclusively for your ferro rods
Faulk –
I think this beats every Striker I’ve ever used… Strong, sharp…
Brian –
These are a great addition to my fire kit. I went with the two pack just in case I lose one or give one away. I’ve been looking at strikers for a while, and these ones caught my eye. I think they are comfortable in the hand, and easy to control even with gloves on. They’re definitely lightweight as well. The length is perfect I think, because some strikers are too short which makes them awkward while trying to use them.
Simon –
I ordered these out of frustration. It seemed like every time I got a striker bundled with a ferro rod I had purchased, the striker was crap so I would just chuck it and use my knife.
This striker is functional. That says a lot for a striker.
Daniel –
Very compact, light weight, and work well. These striker/scrapers work with my ferro rod and keep me from having to use the spine of my knife.
Busybuilder –
These fire steel strikers work great! They are small, and lightweight. The handle makes them easy to grip. The edges of the strikers are sharp, and they bite into the fire steel. They produce a lot of go sparks.
Allen –
This ferro rod scraper is amazing! I have used other scrapers in the past that have never been this good. It is a good sturdy piece of carbide metal that is easy to hold on to. It also has a sharp edge that can easily scrape large strips off.
You can see in the included video how easily you can strike it across the rod to produce extremely hot ribbons for starting a fire.
Richard L. –
Paul –
These strikers work really well and the scrapers are there incase you need to shave some off for starting your fire. the back edge of a knife would work as well but just handy to have these connected to the rod with para cord so you are always ready to go.
admin –
Thank you Paul for the reviews you left to our products, which are helpful for other people to know FERROFIRE.