2-Pack Classic Keyring Fire Starters with Elegant Gift Packaging 5/32″ x 2.5″ Ferro Rod Carbon Alloy Steel Striker for Emergency EDC Gear

  • Two Classic Keyring fire starters: Each unit pairs a ferrocerium rod with a carbon steel striker.
  • 2.5-inch rod: Each rod is 63.5 mm long for a compact keyring setup.
  • Carbon steel striker: Measures 69 × 17 mm, approximately 2.72 × 0.67 inches, with a laser-engraved message.
  • Classic ring carry: Position the keyring and other keys out of the way when using the rod and striker.
  • Foam-fitted gift box: Two units are packed together. Bring your own tinder and practice before an outing.

SKU: KF525.B Category: Tag:

Original price was: $16.99.Current price is: $14.99.

Out of stock

start a camping fire with ferro rod and striker

Classic keyring

A ring-based carry arrangement for the rod and striker.

2.5-inch rod

Each ferrocerium rod is 63.5 mm long.

Two in a box

A pair of fire-starter units in a foam-fitted gift box.

A compact setup to carry with your gear

The FERROFIRE Classic Keyring Fire Starter combines a 2.5-inch ferrocerium rod with a carbon steel striker in a keyring arrangement. Keep the pair together with your outdoor gear, then position the rod and striker so you can use them freely.

The striker measures 69 × 17 mm and carries a laser-engraved message. Two complete units come in a foam-fitted gift box, allowing you to set up two kits or give one to a camping partner.

Package contents: Two Classic Keyring fire-starter units, each with a ferrocerium rod and striker, in a foam-fitted gift box.

At a glance

  • Quantity: 2 keyring fire starters
  • Carry style: Classic keyring
  • Rod material: Ferrocerium
  • Rod length: 2.5 inches (63.5 mm)
  • Striker: Carbon steel, 69 × 17 mm (approximately 2.72 × 0.67 inches)
  • Packaging: Two units in a foam-fitted gift box

Before you strike

Move other keys out of the way and position the keyring so you can control the compact rod and its included striker separately. Check that the ring does not restrict your grip or striking movement.

Prepare, strike and practice

The five technique photos show a different rod, striker and cord arrangement. Use the compact rod and carbon steel striker supplied with your keyring units. The separate SA02 diagram is an edge reference, not a picture of the included keyring striker; the larger assembled fire starter and cord shown are not this keyring set.

Step 1

Prepare your tinder

Gather dry, finely prepared tinder and kindling. Place the tinder on a suitable fire-safe surface.

Step 2

Expose the ferrocerium

If your rod has a protective coating, scrape a small area away to reveal the ferrocerium underneath.

Step 3

Position the striker

Place a suitable scraping edge of the included keychain striker against the exposed rod, close to the tinder. Keep fingers, the keyring and other keys clear of the striking path.

Step 4

Brace your hand

Grip the compact striker securely and keep that hand steady near the tinder. Check that the ring or connector does not restrict the movement.

Step 5

Pull the rod back

Draw the rod toward you against the steady striker to direct sparks into the tinder. Adjust the angle and pressure with practice.

Striker guide

SA02 edge reference

This diagram shows the separate SA02 striker, not the striker supplied with the keyring units. It illustrates the difference between a straight scraping edge and a serrated tinder-preparation end. Do not assume the keyring striker has the same edges or layout.

Practice safely. Tinder preparation and technique matter. Sparks alone do not guarantee ignition, especially with damp tinder. Use only where fires are permitted, keep clear of fuel and other unintended flammable material, and fully extinguish your fire before leaving.

The compact rod needs a controlled grip and suitable tinder. Wipe the parts dry after use and inspect the keyring connections before storage.

Classic Keyring questions

How many units are included?

The pack contains two Classic Keyring fire starters, each with a ferrocerium rod and carbon steel striker.

Is this the quick-release version?

No. This listing is for the Classic Keyring carry style. The Quick-Release model is a separate version.

Is the packaging suitable for giving as a gift?

Yes. Two units are packed together in a foam-fitted gift box.

Is tinder part of the pack?

Tinder is not listed among the contents. Prepare suitable tinder separately and practice using the rod and striker before an outing.

Weight 42 g
Delivery Country

US, CA, DE

Reviews

There are no reviews yet

Be the first to review “2-Pack Classic Keyring Fire Starters with Elegant Gift Packaging 5/32″ x 2.5″ Ferro Rod Carbon Alloy Steel Striker for Emergency EDC Gear”

Q & A

Ask a question
2-Pack Classic Keyring Fire Starters with Elegant Gift Packaging 5/32" x 2.5" Ferro Rod Carbon Alloy Steel Striker for Emergency EDC Gear 2-Pack Classic Keyring Fire Starters with Elegant Gift Packaging 5/32" x 2.5" Ferro Rod Carbon Alloy Steel Striker for Emergency EDC Gear
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
There are no questions yet

Join Waitlist

We will inform you when the product arrives in stock.
Please leave your valid email address below.