Classic keyring
A ring-based carry arrangement for the rod and striker.
2.5-inch rod
Each ferrocerium rod is 63.5 mm long.
Two in a box
A pair of fire-starter units in a foam-fitted gift box.
A compact setup to carry with your gear
The FERROFIRE Classic Keyring Fire Starter combines a 2.5-inch ferrocerium rod with a carbon steel striker in a keyring arrangement. Keep the pair together with your outdoor gear, then position the rod and striker so you can use them freely.
The striker measures 69 × 17 mm and carries a laser-engraved message. Two complete units come in a foam-fitted gift box, allowing you to set up two kits or give one to a camping partner.
Package contents: Two Classic Keyring fire-starter units, each with a ferrocerium rod and striker, in a foam-fitted gift box.
At a glance
- Quantity: 2 keyring fire starters
- Carry style: Classic keyring
- Rod material: Ferrocerium
- Rod length: 2.5 inches (63.5 mm)
- Striker: Carbon steel, 69 × 17 mm (approximately 2.72 × 0.67 inches)
- Packaging: Two units in a foam-fitted gift box
Before you strike
Move other keys out of the way and position the keyring so you can control the compact rod and its included striker separately. Check that the ring does not restrict your grip or striking movement.
Prepare, strike and practice
The five technique photos show a different rod, striker and cord arrangement. Use the compact rod and carbon steel striker supplied with your keyring units. The separate SA02 diagram is an edge reference, not a picture of the included keyring striker; the larger assembled fire starter and cord shown are not this keyring set.
Step 1
Prepare your tinder
Gather dry, finely prepared tinder and kindling. Place the tinder on a suitable fire-safe surface.
Step 2
Expose the ferrocerium
If your rod has a protective coating, scrape a small area away to reveal the ferrocerium underneath.
Step 3
Position the striker
Place a suitable scraping edge of the included keychain striker against the exposed rod, close to the tinder. Keep fingers, the keyring and other keys clear of the striking path.
Step 4
Brace your hand
Grip the compact striker securely and keep that hand steady near the tinder. Check that the ring or connector does not restrict the movement.
Step 5
Pull the rod back
Draw the rod toward you against the steady striker to direct sparks into the tinder. Adjust the angle and pressure with practice.
Striker guide
SA02 edge reference
This diagram shows the separate SA02 striker, not the striker supplied with the keyring units. It illustrates the difference between a straight scraping edge and a serrated tinder-preparation end. Do not assume the keyring striker has the same edges or layout.
Practice safely. Tinder preparation and technique matter. Sparks alone do not guarantee ignition, especially with damp tinder. Use only where fires are permitted, keep clear of fuel and other unintended flammable material, and fully extinguish your fire before leaving.
The compact rod needs a controlled grip and suitable tinder. Wipe the parts dry after use and inspect the keyring connections before storage.
Classic Keyring questions
How many units are included?
The pack contains two Classic Keyring fire starters, each with a ferrocerium rod and carbon steel striker.
Is this the quick-release version?
No. This listing is for the Classic Keyring carry style. The Quick-Release model is a separate version.
Is the packaging suitable for giving as a gift?
Yes. Two units are packed together in a foam-fitted gift box.
Is tinder part of the pack?
Tinder is not listed among the contents. Prepare suitable tinder separately and practice using the rod and striker before an outing.











Reviews
There are no reviews yet